Think Green Solutions logo
View Your Warranty

With over 10 years experience in the industry, our team has seen the evolution of LED technology firsthand and has evolved a Warranty to match each of the different product ranges.

The following warranty provisions, provided by Think Green Solutions® and hereby accepted by the original purchaser exclude and supersede any and all other warranties, whether expressed or implied. No salesperson, distributor, dealer, retailer or other representative has the authority to modify or extend this warranty in any respect, whether verbally or in writing.

Applicable Think Green Solutions® Product

Products covered by this warranty include our PLT and BPLT series panels, HB2 and HB3 series and HBR series high bay luminaires and LB2 and LB3 series low bay luminaires.

Other Think Green Solutions® products are covered by our other warranties.

Materials and Workmanship (10 Years)

Think Green Solutions® (“TGS”) warrants the above-noted THINK-branded LED products to be free of defects in materials and workmanship for a period of 10 years from the date of original purchase.

Materials are warranted against substantial deterioration that renders the function of the product impaired.

Materials are not warranted against reasonably expected natural aging over time, such as fading or chalking of painted surfaces. Defects or product impairment caused by water contact beyond the fixture IP rating, improper or unauthorized alteration or use, chemical corrosion, physical accidents or abuse, fire, animal activity, or operation outside of specified or normal environmental conditions are expressly not covered under this warranty.

Power Quality Considerations
In our experience, approximately 4 out of 100 facilities present power quality issues (voltage sags and surges, voltage transients, harmonics issues, ground faults) that are serious enough to significantly reduce the lifespan of any modern LED driver. This is more often the case in facilities with equipment like welders, large machinery, high-power motors, pumps, or variable frequency drives (VFDs), all of which can disrupt power quality. In contrast, facilities like warehouses, office buildings, and retail stores typically have more stable power quality.
The light engine of our products are designed for longevity (<2% failure rate over 5 years) under normal environmental conditions. Accordingly, higher failure rates are a strong indicator of power quality issues within the facility and a power quality assessment by the facility owner is required to demonstrate that power quality meets relevant standards. Power quality assessment must be performed for a minimum of 2 months with high temporal resolution equipment capable of capturing the most common types of power quality issues including harmonic distortion and transient voltage disturbances. For clarity, RMS data meters cannot resolve most power quality issues affecting light fixtures.
Product exposed to the following power quality issues are expressly not covered under this warranty:
  • operation outside of Standard Voltage Service Range standards, defined by ANSI C64 as 10% bandwidth variation for the nominal system voltage
  • exposure to voltage and current harmonic distortion in excess of IEE 519-2022 acceptable standards
  • exposure to ground fault events

A TGS LED product is considered defective only if 10% or more of the individual LED chips within a product fail to emit light.

Performance (5 Years)

Above and beyond standard materials and workmanship warranty provisions, TGS additionally warrants THINK- branded LED products against performance degradation for a period of 5 years from the date of original purchase. Performance degradation shall be defined by a significant change of either or both of the following performance criteria, as measured against an identical new, or co-installed fixture operating in the same environmental conditions:

• Visually significant differences of colour output (colour shift)

• Visually significant reduction of lumen output.

Warranty Claims

The original purchaser must inform TGS of a warranty claim in writing within 30 days of defect occurrence and shall provide any reasonably requested information, including photos and the original receipt/invoice, to TGS for evaluation. TGS shall determine, in its sole discretion, whether a product is defective. The failed product must be retained by the purchaser, and if requested, returned to TGS with a Return Material Authorization.

Think Green Solutions® total liability in relation to a defective product shall in any event be limited to the dollar value paid to TGS for that defective product. In no event shall TGS be liable for incidental, compensatory, consequential, indirect, special or other damages.

Freight and handling costs, removal costs, installation costs, and any other service charges related to the repair or replacement of the product are excluded from this warranty.

Remedy for Warranted Defects

Within 5 years from the original date of purchase, in the event that TGS deems the product defective, TGS will elect to satisfy this warranty by providing one of the following remedies to the original purchaser of the product: repair of the existing product or replacement of the existing product with a new or refurbished part or product that is substantially equivalent.

During the 6th through 10th year of warranty, in the event that Think Green Solutions® deems a product defective, TGS will discount the Manufacturer’s Suggested Retail Price (MSRP) of a new TGS replacement product as per the chart below:

Severability

All provisions of this warranty are severable. In the event that any part or provision is deemed legally invalidated, all other parts or provisions remain in force.

2024.08.16

The following warranty provisions, provided by Think Green Solutions® and hereby accepted by the original purchaser exclude and supersede any and all other warranties, whether expressed or implied. No salesperson, distributor, dealer, retailer or other representative has the authority to modify or extend this warranty in any respect, whether verbally or in writing.

Applicable Think Green Solutions® Product

Products covered by this warranty include our HBP series high bay luminaires, our SBT and SB3 series shoe-box

luminaires and our FLP flood lights.

Other Think Green Solutions® products are covered by our other warranties.

Materials & Workmanship (7 Years)

Think Green Solutions® (“TGS”) warrants the above-noted THINK-branded LED products to be free of defects in materials and workmanship for a period of 7 years from the date of original purchase.

Materials are warranted against substantial deterioration that renders the function of the product impaired.

Materials are not warranted against reasonably expected natural aging over time, such as fading or chalking of painted surfaces. Defects or product impairment caused by water contact beyond the fixture IP rating, improper or unauthorized alteration or use, chemical corrosion, physical accidents or abuse, fire, animal activity, or operation outside of specified or normal environmental conditions are expressly not covered under this warranty.

Power Quality Considerations
In our experience, approximately 4 out of 100 facilities present power quality issues (voltage sags and surges, voltage transients, harmonics issues, ground faults) that are serious enough to significantly reduce the lifespan of any modern LED driver. This is more often the case in facilities with equipment like welders, large machinery, high-power motors, pumps, or variable frequency drives (VFDs), all of which can disrupt power quality. In contrast, facilities like warehouses, office buildings, and retail stores typically have more stable power quality.
The light engine of our products are designed for longevity (<2% failure rate over 5 years) under normal environmental conditions. Accordingly, higher failure rates are a strong indicator of power quality issues within the facility and a power quality assessment by the facility owner is required to demonstrate that power quality meets relevant standards. Power quality assessment must be performed for a minimum of 2 months with high temporal resolution equipment capable of capturing the most common types of power quality issues including harmonic distortion and transient voltage disturbances. For clarity, RMS data meters cannot resolve most power quality issues affecting light fixtures.
Product exposed to the following power quality issues are expressly not covered under this warranty:
  • operation outside of Standard Voltage Service Range standards, defined by ANSI C64 as 10% bandwidth variation for the nominal system voltage
  • exposure to voltage and current harmonic distortion in excess of IEE 519-2022 acceptable standards
  • exposure to ground fault events

A TGS LED product is considered defective only if 10% or more of the individual LED chips within a product fail to emit light.

Performance (5 Years)

Above and beyond standard materials and workmanship warranty provisions, TGS additionally warrants THINK- branded LED products against performance degradation for a period of 5 years from the date of original purchase. Performance degradation shall be defined by a significant change of either or both of the following performance criteria, as measured against an identical new, or co-installed fixture operating in the same environmental conditions:

• Visually significant differences of colour output (colour shift)

• Visually significant reduction of lumen output.

Warranty Claims

The original purchaser must inform TGS of a warranty claim in writing within 30 days of defect occurrence and shall provide any reasonably requested information, including photos and the original receipt/invoice, to TGS for evaluation. TGS shall determine, in its sole discretion, whether a product is defective. The failed product must be retained by the purchaser, and if requested, returned to TGS with a Return Material Authorization.

Think Green Solutions® total liability in relation to a defective product shall in any event be limited to the dollar value paid to TGS for that defective product. In no event shall TGS be liable for incidental, compensatory, consequential, indirect, special or other damages.

Freight and handling costs, removal costs, installation costs, and any other service charges related to the repair or replacement of the product are excluded from this warranty.

Remedy for Warranted Defects

Within 5 years from the original date of purchase, in the event that TGS deems the product defective, TGS will elect to satisfy this warranty by providing one of the following remedies to the original purchaser of the product: repair of the existing product or replacement of the existing product with a new or refurbished part or product that is substantially equivalent.

During the 6th through 7th year of warranty, in the event that Think Green Solutions® deems a product defective, TGS will discount the Manufacturer’s Suggested Retail Price (MSRP) of a new TGS replacement product as per the chart below:

Severability

All provisions of this warranty are severable. In the event that any part or provision is deemed legally invalidated, all other parts or provisions remain in force.

2024.08.16

The following warranty provisions, provided by Think Green Solutions® and hereby accepted by the original purchaser exclude and supersede any and all other warranties, whether expressed or implied. No salesperson, distributor, dealer, retailer or other representative has the authority to modify or extend this warranty in any respect, whether verbally or in writing.

Applicable Think Green Solutions® Product

Products covered by this warranty include our Think LED T8 tubes, LS4 series linear strips, and our WP and WP3 series wallpack luminaires.

Other Think Green Solutions® products are covered by our other warranties.

Materials and Workmanship (5 Years)

Think Green Solutions® (“TGS”) warrants THINK-branded LED products to be free of defects in materials and workmanship for a period of 5 years from the date of original purchase.

Materials are warranted against substantial deterioration that renders the function of the product impaired.

Materials are not warranted against reasonably expected natural aging over time, such as fading or chalking of painted surfaces. Defects or product impairment caused by water contact beyond the fixture IP rating, improper or unauthorized alteration or use, chemical corrosion, physical accidents or abuse, fire, animal activity, or operation outside of specified or normal environmental conditions are expressly not covered under this warranty.

Power Quality Considerations
In our experience, approximately 4 out of 100 facilities present power quality issues (voltage sags and surges, voltage transients, harmonics issues, ground faults) that are serious enough to significantly reduce the lifespan of any modern LED driver. This is more often the case in facilities with equipment like welders, large machinery, high-power motors, pumps, or variable frequency drives (VFDs), all of which can disrupt power quality. In contrast, facilities like warehouses, office buildings, and retail stores typically have more stable power quality.
The light engine of our products are designed for longevity (<2% failure rate over 5 years) under normal environmental conditions. Accordingly, higher failure rates are a strong indicator of power quality issues within the facility and a power quality assessment by the facility owner is required to demonstrate that power quality meets relevant standards. Power quality assessment must be performed for a minimum of 2 months with high temporal resolution equipment capable of capturing the most common types of power quality issues including harmonic distortion and transient voltage disturbances. For clarity, RMS data meters cannot resolve most power quality issues affecting light fixtures.
Product exposed to the following power quality issues are expressly not covered under this warranty:
  • operation outside of Standard Voltage Service Range standards, defined by ANSI C64 as 10% bandwidth variation for the nominal system voltage
  • exposure to voltage and current harmonic distortion in excess of IEE 519-2022 acceptable standards
  • exposure to ground fault events

A TGS LED product is considered defective only if 10% or more of the individual LED chips within a product fail to emit light.

Performance (5 Years)

Above and beyond standard materials and workmanship warranty provisions, TGS additionally warrants THINK- branded LED products against performance degradation for a period of 5 years from the date of original purchase. Performance degradation shall be defined by a significant change of either or both of the following performance criteria, as measured against an identical new, or co-installed fixture operating in the same environmental conditions:

• Visually significant differences of colour output (colour shift)

• Visually significant reduction of lumen output.

Warranty Claims

The original purchaser must inform TGS of a warranty claim in writing within 30 days of defect occurrence and shall provide any reasonably requested information, including photos and the original receipt/invoice, to TGS for evaluation. TGS shall determine, in its sole discretion, whether a product is defective. The failed product must be retained by the purchaser, and if requested, returned to TGS with a Return Material Authorization.

Think Green Solutions® total liability in relation to a defective product shall in any event be limited to the dollar value paid to TGS for that defective product. In no event shall TGS be liable for incidental, compensatory, consequential, indirect, special or other damages.

Freight and handling costs, removal costs, installation costs, and any other service charges related to the repair or replacement of the product are excluded from this warranty.

Remedy for Warranted Defects

Within 5 years from the original date of purchase, in the event that TGS deems the product defective, TGS will elect to satisfy this warranty by providing one of the following remedies to the original purchaser of the product: repair of the existing product or replacement of the existing product with a new or refurbished part or product that is substantially equivalent.

For any warranty claim, the warranty period remains as of the date of the original purchase.

Severability

All provisions of this warranty are severable. In the event that any part or provision is deemed legally invalidated, all other parts or provisions remain in force.

2024.08.16

Contact
 

Think Green Solutions
1574 Eagle Street North
Cambridge, ON
N3H 4S5

Phone: 1-647-381-3733

Privacy Policy  |  Terms & Conditions  |  Warranty

Copyright © 2022 Think Green Solutions. All Rights Reserved.

chevron-downmenu-circlearrow-left-circle